废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

磁性Fe_3O_4/石墨烯纳米复合材料催化降解水中17β-雌二醇

利用化学沉淀法制备磁性四氧化三铁/石墨烯(Fe3O4/GE)纳米复合材料,并将其与H2O2构成非均相Fenton体系用于催化降解水中微量的17β-雌二醇(E2),研究了初始p H值,初始H2O2浓度,催化剂用量对E2降解的影响。结果表明,Fe3O4/GE纳米复合材料在无需外加光源的条件下能够有效催化降解E2。在p H 7.0,E2初始浓度为1 mg/L,初始H2O2浓度为15 mmol/L,Fe3O4/GE投加量为15 mg/L的条件下,反应8 h后可去除92.9%的E2。Fe3O4/GE具有便捷的磁分离特性和稳定的催化活性,经过7次循环使用后对E2的降解效率仍保持在91.5%左右。     

活性炭吸附和两级Fenton氧化组合工艺处理高盐对氨基苯酚生产废水

采用活性炭吸附和两级Fenton氧化组合工艺对高盐度对氨基苯酚生产废水进行了处理实验研究。结果表明,p H值对活性炭去除有机物的影响较小。当活性炭投加量为4 g/L时,TOC去除率61%。分级加药可以有效提高Fenton氧化对有机物的去除效率。在温度为25℃、p H为3、30%H2O2投加量为3%(V/V)、Fe2+/H2O2摩尔比为0.05时,两级Fenton氧化处理后,出水TOC降至150 mg/L以下。此外,Fenton氧化后形成氢氧化铁污泥颗粒粒径为4.5μm,经过聚丙烯酰胺(PAM)絮凝之后,污泥的粒径明显增加,过滤特性改善。PAM絮凝效果依赖于溶液的p H值,当p H超过10后会失去作用,故在使用过程中需要严格控制溶液的p H值。     

羟胺强化Fenton反应降解水中氯酚

针对传统Fenton体系Fe（Ⅲ）累积和pH适用范围过窄等缺点，采用羟胺（HA）强化的HA-Fenton体系，以对氯苯酚（4-CP）为目标污染物进行降解实验，考察了Fe（Ⅱ）投加量、H2O2投加量、HA投加量和溶液pH等工艺条件对4-CP去除率的影响。实验结果表明：HA-Fenton体系适用于酸性和弱酸性条件，最佳pH范围为3.0~4.0；在溶液pH为3.0、Fe（Ⅱ）投加量为5.0 μmol/L、H2O2投加量为0.4 mmol/L、HA投加量为0.20 mmol/L的最适条件下，反应10 min， 4-CP去除率达64.25 %。     

EDTA滴定法测定高锰水体总硬度的干扰和消除

测定水质总硬度最常用的是EDTA 滴定法,该法易受到多种因素的影响,而锰是重要影响因素之一。分析了锰对EDTA滴定法的影响,对比了两种掩蔽剂对不同浓度锰的掩蔽效果和对检测结果的影响。对实验结果进行了总结分析,为EDTA滴定法测定高锰水体总硬度过程中不同掩蔽剂的选择提供一定的依据。     

TiO2气溶胶快速去除空气中的芥子气模拟剂

在自制反应器内,通过喷射法将纳米TiO_2分散成气溶胶形式,用以降解空气中的芥子气模拟剂二乙基硫醚(DES)。利用自行设计的一套气溶胶沉降行为评价装置,对TiO_2气溶胶的释放条件进行了优化。系统研究了相对湿度、反应温度、光强、催化剂加入量、反应物浓度等因素对DES降解速率和彻底矿化速率的影响。结果表明:TiO_2气溶胶对2.80 mg/L(近似芥子气快速致死浓度)DES降解的半衰期由涂覆型TiO_2的34.5 min缩短至8.5 min;TiO_2气溶胶光催化降解DES的最佳相对湿度为35%,此时CO_2最快生成速率可达34.64μg/(L·min),150 min内彻底矿化比例达66.1%;对于1.5 L反应器,催化剂加入量为30 mg时降解DES的量效比达到最佳状态;TiO_2气溶胶光催化适用于含低浓度DES空气的快速净化。     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

Molecular docking analysis on antifungal properties of acid condensate produced from palm kernel shell

The rise in the number of fungi that resisted antifungal action is of serious concern nowadays. In this study, the potential of acid condensate (AC) produced from microwave-assisted pyrolysis of palm kernel shell (PKS) was investigated for its antifungal properties through molecular docking evaluation. The phenolic-rich AC was determined for its chemical compositions using the GC–MS analysis where compounds with the highest phenolics content were further evaluated (using the Autodock Tools 1.5.7) for its potential enzymes/protein binding properties. From the GC–MS analysis, catechol, guaiacol and syringol were present at highest percentages. This directly correlates with results obtained from the molecular docking works where all these ligands managed to bind (indicated by H-bond, π-stacking, hydrophobic interaction) with some of the amino acid at the active sites which indicate its potential to inhibit substrate binding of this enzyme. As a conclusion, this study demonstrated the potential use of AC from agricultural biomass such as PKS as a natural-based antifungal agent that can reduce environmental and health impacts.     

MCM-41分子筛负载铁铈催化降解甲基橙

采用等体积浸渍法制备了负载型有序介孔Fe-Ce/MCM-41催化剂。研究了该催化剂降解甲基橙的适宜工艺条件,并采用XPS,XRD,TEM技术对该催化剂进行了表征。实验结果表明,该催化剂Fenton氧化降解甲基橙的较适宜工艺条件为:溶液pH 5.0、甲基橙溶液初始质量浓度100 mg/L、催化剂加入量2.0 g/L、H_2O_2浓度20 mmol/L,在此适宜条件下反应120 min时,甲基橙去除率接近100%。表征结果显示:Fe-Ce/MCM-41催化剂主要由铁、铈、氧、碳4种元素组成;铁与铈的摩尔比接近3∶1;铁和铈主要以Fe_3O_4和CeO_2的形态存在于催化剂表面。     

Inhibition effects of aluminum dust explosions by various kinds of ammonium polyphosphate

In this work, vinyltriethoxysilane (A151) and 3-aminopropyltriethoxysilane (KH550) were used to modify ammonium polyphosphate (APP), showing that the dispersibility of APP could be improved remarkably by A151 and KH550. The maximum explosion pressure of aluminum dust explosion decreased with the addition of APP, A151-APP (APP-A) and KH550-APP (APP-B), with the exception of the case where the inerting ratio (α) of APP-A was less than 0.4. After the addition of APP-B, there was little difference in flame propagation behavior and explosion pressure compared with that of adding APP, indicating that APP-B could retain the inhibition performance of APP compared with APP-A. When the inerting ratios of APP, APP-A and APP-B were 1.2, 1.4 and 1.4, respectively, the aluminum dust explosion could be completely inhibited. The explosion residues of aluminum dust/APP mainly consisted of Al₂O₃, P-containing and N-containing compounds. It could be analyzed that APP exerted the inhibition effect through both chemical and physical effects.